LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Communication System) >> Diagnostic Information and Procedures >> Troubleshooting for Communication Bus Off >> Communication Check >> Steering angle sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering angle sensor

WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push engine switch to change ignition mode to "OFF".
  2. Connect connector to steering angle sensor.
  3. Push engine switch to change ignition mode to "ON".
  4. Select "Communication Bus Check" under "Bus Check" menu of SUZUKI scan tool.
  5. Confirm that CAN communication already connecting the control modules, sensor and steering angle sensor is operating normally, see TCM (CVT model) .
  6. If any malfunction is found, substitute a known-good steering angle sensor and recheck DTC, see STEERING ANGLE SENSOR REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals