LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2013 >> SX4 Crossover, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Electronic Stability Program) >> Diagnostic Information and Procedures >> DTC C1040: ESP® Function Failure >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
C1040: SYMPTOM TROUBLESHOOTING REFERENCE CHART

Step Action YES NO
1  Was "Electronic Stability Program Check" performed  Go to Step 2. Go to ELECTRONIC STABILITY PROGRAM CHECK .
2  Check DTC for ESP® 
  1. Connect SUZUKI scan tool to DLC with ignition switch turned OFF.
  2. Turn ignition switch ON and check DTC for ESP®.

Is there any DTC(s) other than C1040? 		 Go to applicable DTC troubleshooting. Substitute a known-good ESP® hydraulic unit/control module assembly and recheck.
scientia non olet · About LEMON Manuals