Detecting Condition and Trouble Area
WARNING: This page is about a different car, the 2011 Suzuki SX4. However, it is still accessible from the selected car via links, so may be relevant.
P1615: DETECTING CONDITION AND TROUBLE AREA
| Detecting Condition |
Trouble Area |
- While registering the transponder code in ECM, the keyless start control module sent a signal to ECM indicating that the ID code could not be registered.
- The ID code could not be registered in the keyless start control module or ECM.
|
- Wire circuits between steering lock unit and keyless start control module
- CAN communication circuit
- Steering lock unit
- Yaw rate/G sensor assembly (ESP® model)
- Steering angle sensor (ESP® model)
- Keyless start control module
- Combination meter
- TCM (if equipped)
- 4WD control module (if equipped)
- ABS/ESP® control module
- BCM
- ECM
- ID controller (if equipped)
|