Module - Steering Column Control - Remove And Replace: Notes

WARNING: This page is about a different car, the 2024 Tesla Model Y, 2023 Tesla Model Y, 2022 Tesla Model Y, 2021 Tesla Model Y, and 2020 Tesla Model Y. However, it is still accessible from the selected car via links, so may be relevant.

Last modified: 30/11/2023 01:57:37

Fig 1: Steering Column Control Module Components Location

Courtesy of TESLA, INC.

NOTE: See PERSONAL PROTECTION to make sure wearing proper PPE when performing the below procedure.

2023-11-30: Replaced Toolbox routine "PROC-VCLEFT_X_STEERING-COLUMN-CALIBRATION" with "PROC_STEERING_COLUMN_CALIBRATION".
2023-08-28: Updated Toolbox routines to be run after SCCM installation.