LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Tesla >> 2014 >> Model S Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Steering -- Model Y) >> Upper Column Steering Wheel Steering Lock >> Steering Wheel - Remove And Install >> Remove
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Wheel - Remove And Install: Remove

WARNING: This page is about a different car, the 2024 Tesla Model Y, 2023 Tesla Model Y, 2022 Tesla Model Y, 2021 Tesla Model Y, and 2020 Tesla Model Y. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the vehicle's front wheels straight and the steering wheel centered.
  2. Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
  3. Remove the HEPA filter assembly. See ASSEMBLY - FILTER - HEPA - REMOVE AND INSTALL
  4. Disconnect LV power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
  5. Remove the driver airbag. See AIRBAG - DRIVER (REMOVE AND REPLACE) .
  6. Disconnect the steering wheel electrical wiring harness connector.
    G14841042Courtesy of TESLA, INC.
  7. Remove and discard the bolt that attaches the steering wheel to the steering column.

    80 N.m 

    Tip: Use of the following tool(s) is recommended:

    • 10 mm hex
    • 3/8 in std ratchet
    • 3/8 in flex head torque wrench (installation only)
    • 3 in extension
    G14841043Courtesy of TESLA, INC.
  8. Remove the steering wheel from the steering column.
scientia non olet · About LEMON Manuals