Module - Restraint Control - RCM - Remove And Replace: Installation
Installation procedure is the reverse of removal, except for the following:
- Reinstall the latest vehicle firmware, or update the firmware if not the latest. See FIRMWARE REINSTALL - TOUCHSCREEN or FIRMWARE UPDATE .
- In Toolbox 3, click the Actions tab, type "Airbag-Config" into the search field, click PROC_RCM_X_AIRBAG-CONFIG , click Run, and allow the routine to complete.
- In Toolbox 3, click the Actions tab, type "ESP-CONFIG" into the search field, click PROC_ESP_X_ESP-CONFIG , click Run , and allow the routine to complete.
- Sit in the driver's seat. Step on the brake pedal to turn on the drive rail to cycle the power on the vehicle.
- Ensure that the airbag safety indicator light displays on the instrument cluster during vehicle startup and then turns off after 6 seconds.