LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Tesla >> 2017 >> Model X 75D >> Repair and Diagnosis >> Steering >> Steering Column >> Steering -- Model X >> Steering Rack And Lower Column >> Lock To Lock-Angle Test >> Test Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test Procedure

  1. Enable Service Mode through the touchscreen. See SERVICE MODE .
  2. On the vehicle touchscreen, touch CAN Viewer  and select the signals STW_ANGLHP_STAT > StW_AnglHP  and EPAS_sysStatus > EPAS_torsionBarTorque  .
    NOTE: STW_ANGLHP_STAT > StW_AnglHP  can be found under CH  bus. EPAS_sysStatus > EPAS_torsionBarTorque  can be found under CH  bus on Intel MCU's, and under ETH  bus on Tegra MCU's.
  3. Turn the steering to the left lock stop and hold the EPAS_torsionBarTorque  value at 10 N.m while reading the angle. Record this value.
  4. Turn the steering to the right lock stop and hold the EPAS_torsionBarTorque  value at 10 N.m while reading the angle. Record this value.
  5. If the two angle values are more than 6 degrees apart, center the steering wheel. See STEERING WHEEL (REMOVE AND REPLACE) .
scientia non olet · About LEMON Manuals