Image Capture - Forward Facing Camera: Setup

If the vehicle is equipped with air suspension, set the ride height to Standard.
Place the target tripod in the appropriate starting position:
- The target is placed against the front fascia and centered on the Tesla "T."
- The target has 2 legs facing the vehicle and both are less than 5 mm from the lower valance.
- The target and vehicle are both on a flat surface.
  NOTE: If a flat surface is unavailable, ensure that the vehicle and target are both on the same slope.
Courtesy of TESLA, INC.
Ensure that the target is on flat ground by examining the bubble level on the back of the target.

Courtesy of TESLA, INC.
Apply a piece of colored tape onto the target so that the top edge of the tape is 130 cm from the ground.
Connect a laptop with Toolbox to the vehicle.