Module - Body Controller - BCM (2nd generation) (RHD) - Remove And Replace: Installation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
Installation procedure is the reverse of removal, except for the following:
- After connecting 12V power, redeploy the firmware, refer to Firmware Reinstall - Toolbox .
- After installation is completed, relearn all key fobs, refer to Key Fob - Program .
- Perform an immobilizer reset: select Panels > Security > Immobilizer Reset
, and then follow the on-screen instructions.