LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Tesla >> 2021 >> Model S Long Range >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Safety And Restraint Systems -- Model 3) >> Pedestrian Protection System >> Actuator - Pedestrian Protection - LH - Remove and Replace >> Install
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Actuator - Pedestrian Protection - LH - Remove and Replace: Install

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the nuts (x2) that attache the pyrotechnic actuator to the body, and then install the actuator to the vehicle.

    6 N.m (4.4 ft-lbs) 

    Tip: Use of the following tool(s) is recommended:

    • Torx T30 socket
    • 1/4 in std ratchet
    G14748081Courtesy of TESLA, INC.
  2. Connect pyrotechnic actuator connector (X1).
    G14748082Courtesy of TESLA, INC.
  3. Install the wheel arch liner. See WHEEL ARCH LINER - FRONT - LH (REMOVE AND REPLACE) .
  4. Connect the 12V power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
  5. Install the underhood storage unit. See UNDERHOOD STORAGE UNIT (REMOVE AND REPLACE) .
scientia non olet · About LEMON Manuals