Drive Unit - Rear - Large - Remove And Replace: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.

Last modified: 21/07/2023 17:13:48

Revision History:

2023-07-21: Added Note about security-related toolbox actions.

NOTE: Some of the Toolbox Actions within this procedure are related to vehicle security, and can only be performed by Tesla employees or third parties authorized to perform security-related Toolbox Action. To learn more, see the Service Subscription FAQs available in the user account dropdown menu.

NOTE: Loosen suspension fasteners by hand, then use a cordless electric drill with a 3/8 in drive adapter and an 3/8 in drive air ratchet wrench.

This procedure includes the removal of the new drive unit from the shipping crate, unloading the new drive unit on the powertrain table, and boxing up the old drive unit on the crate.