Ground Strap - Front Drive Unit - Remove And Replace: Install
- Install the front drive unit ground strap to the LH casting, and then install the bolt that attaches the strap to the casting.
15 N.m (11.1 ft-lbs)
- Install the captive bolt that attaches the ground strap to the front drive unit.
5.5 N.m (4.1 ft-lbs)
- Fasten the clip that attaches the electrical harness to the front drive unit LV harness bracket.
- Install the wiper module. See Wiper Module (Remove and Replace) .
- Install the cowl screen panel. See Panel - Cowl Screen (Remove and Replace) .
- Connect LV Power. See LV Power (Disconnect and Connect) .
- Install the underhood storage unit. See Underhood Storage Unit (Remove and Install) .
- Hold the LH and RH upper B-pillar buttons in the "Close" position to manually calibrate the LH and RH rear doors.