Front Drive Unit Assembly - Bushing, RH, 3DUF - Remove And Replace: Remove
- Place the vehicle on the 2-post lift.NOTE: Ensure the vehicle is not charging.
- Remove the front subframe. See FRONT SUBFRAME - FRONT SUBFRAME ASSEMBLY - REMOVE AND REPLACE .
- Install the bushing removal cups and stud onto the RH bushing, and use cups K, B and I to drive the bushing out of the front drive unit.NOTE: Always apply torque to the bearing side when removing or installing a bushing. Drive the bushing until the cup and bushing assembly is fully removed from the front drive unit.
Tip: Use of the following tool(s) is recommended:
- Combination Wrench 12pt 22 mm
- Ratcheting Combination wrench Fixed head 22 mm
- Drive Unit Bushing Kit
- Remove cups and the old bushing from the threaded stud.