Front Drive Unit Assembly - LH Mount Assembly, 3DUF - Remove And Replace: Remove
- Lower the front subframe assembly and remove the subframe lifting tool. See FRONT SUBFRAME - FRONT SUBFRAME ASSEMBLY - REMOVE AND REPLACE .
- Release the front drive unit harness clips (x2) from the inverter housing.
- Remove the bolts (x3) that attach the LH front drive unit mount to the front drive unit, and then remove the mount from the front drive unit.
Tip: Use of the following tool(s) is recommended:
- External Torx 3/8 in E14 Socket
- Ratchet/torque wrench
- Torque wrench with angle measurement