Front Drive Unit Assembly - Front Motor Mount Assembly, RH Isolator - Remove And Replace: Install
- Install an O-ring to the end of each new bolt which is used to attach the LH and the RH motor mount isolators to the body.
- Hand-tighten the new bolts that attach the motor mount isolators to the body.
- Tighten the new bolts (x6) that attach the motor mount isolator to the body.
62 N.m (45.7 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- External Torx 3/8 in E14 Socket
- 3 in extension
- Flex head ratchet/flex head torque wrench
- Install the front subframe assembly. See FRONT SUBFRAME - FRONT SUBFRAME ASSEMBLY - REMOVE AND REPLACE .
- Check the vehicle wheel alignment, and adjust if necessary. See FOUR WHEEL ALIGNMENT CHECK (NO ADJUSTMENT NEEDED) .