LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1988 >> Cab & Chassis Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Computer Control System >> Component Testing >> Injector Solenoid Resistor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Injector Solenoid Resistor

  1. Turn ignition off. Unplug injector solenoid resistor. Check resistance between terminal + B and other terminals. See Figure and Figure . See INJECTOR SOLENOID RESISTOR RESISTANCE  table.
  2. If resistance is not as specified, replace solenoid resistor. See INJECTOR SOLENOID RESISTOR LOCATION  table.
INJECTOR SOLENOID RESISTOR RESISTANCE

Model Ohms
4-Cyl. & V6 2-3
INJECTOR SOLENOID RESISTOR LOCATION

Model Location
4-Cyl. & V6 Right Fenderwell
Fig 1: Pickup V6 Injector Solenoid Connector I.D.
G95425Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Pickup 4-Cyl. Injector Solenoid Connector I.D.
G95428Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals