Clearing Trouble Codes
- After repairs are performed, clear ECU memory of all stored trouble codes. To clear memory, turn ignition off and remove fuse from fuse block for 30 seconds or more. See CLEARING DIAGNOSTIC CODES table for appropriate fuse removal.
- Fuse may require to be removed longer depending on the ambient temperature. Replace fuse and exit diagnostic mode. Trouble codes can also be cleared by disconnecting vehicle battery. However, other memory functions (clock, etc.), will need to be reset.
CLEARING DIAGNOSTIC CODES
| Application | Fuse (Amperage) |
|---|---|
| Cressida | EFI (15) |