LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1993 >> Tercel LE, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pressure Regulators >> Removal & Installation (Tercel)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (Tercel)

  1. Disconnect vacuum hose from pressure regulator. Release fuel pressure at fuel filter. See FUEL SYSTEM PRESSURE RELEASE. Using a rag under pressure regulator, slowly remove fuel pipe union bolt at pressure regulator. Remove pressure regulator mounting bolts from fuel rail.
  2. To install, apply light coat of gasoline to NEW "O" ring and install onto pressure regulator. Rotate pressure regulator left and right while installing pressure regulator into fuel rail. Verify regulator rotates/twists smoothly to verify "O" ring is positioned properly. If injector does not rotate, remove and replace "O" ring.
  3. Tighten 2 mounting bolts to 69 INCH lbs. (7.8 N.m). Install and tighten fuel pipe union bolt to pressure regulator to 14 ft. lbs. (19 N.m). Connect vacuum hose. Check for fuel leakage. See CHECKING FOR FUEL LEAKS.
scientia non olet · About LEMON Manuals