Circuit Opening Relay
- Ensure ignition is off. Remove circuit opening relay. See CIRCUIT OPENING RELAY LOCATION table. See Fig 1.CIRCUIT OPENING RELAY LOCATION
Application Relay Location 3.4L Below Lower Right Corner Of Fuse/Relay Box Located Behind Lower Instrument Panel Cover, At Driver's Side Of Instrument Panel To The Left Of Steering Column - To test circuit opening relay continuity, use ohmmeter to check continuity between specified terminals. See Figure.
- To test circuit opening relay operation, apply battery voltage and ground to relay and use ohmmeter to check continuity between specified terminals. See Figure. Replace circuit opening relay if defective.