Ignition Timing

WARNING: This page is about a different variant/trim than selected.

IGNITION TIMING ⁽¹⁾

Application

⁽²⁾ Base Timing

⁽³⁾ ECM Controlled Timing

1.8L

8-12

⁽⁴⁾

⁽¹⁾	Check with engine at normal operating temperature, transmission/transaxle in Neutral, parking brake applied, electric cooling fan off (if equipped) and A/C and all accessories off.

⁽²⁾	With Jumper Wire (SST 09843-18020) installed between terminals TE1 and E1 on data link connector No. 1.

⁽³⁾	With jumper wire removed from data link connector No. 1.

⁽⁴⁾	Information is not available from manufacturer at time of publication.