LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1998 >> Supra 3.0 D >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Camshaft Position Sensor Resistance >> Turbo
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Position Sensor Resistance: Turbo

  1. Disconnect electrical connector from camshaft position sensors. Camshaft position sensors are located on intake manifold side of cylinder head. See Fig 2. Using ohmmeter, check resistance between electrical terminals on each camshaft position sensor.
  2. Ensure camshaft position sensor resistance is within specification. See CAMSHAFT POSITION SENSOR RESISTANCE  table. Replace camshaft position sensor if resistance is not within specification. See REMOVE/INSTALL/OVERHAUL article. Reinstall electrical connector on camshaft position sensor.
CAMSHAFT POSITION SENSOR RESISTANCE

Application Ohms
Non-Turbo & Turbo
Cold (1) 835-1400
Hot (2) 1060-1645
(1) Cold is with temperature of 14-122°F (-10-50°C).
(2) Hot is with temperature of 122-212°F (50-100°C).
Fig 1: Locating & Checking Camshaft Position Sensor (Non-Turbo)
G98F11234Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Locating & Checking Camshaft Position Sensor (Turbo)
G95G31365Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals