September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Headlight Control Switch
- Remove necessary steering column covers for access to headlight control switch. See Figure. Disconnect 17-pin electrical connector from headlight control switch.
- Using ohmmeter, check for no continuity and continuity between specified electrical terminals on headlight control switch in relation to headlight control switch position. See Fig 1. See HEADLIGHT CONTROL SWITCH CONTINUITY table. Replace headlight control switch if defective.
HEADLIGHT CONTROL SWITCH CONTINUITY
| Switch Position |
Switch Terminals No. |
Specification |
| OFF |
|
|
| TAIL |
14 & 16 |
Continuity |
| HEAD |
13, 14 & 16 |
Continuity |
| FLASH |
7, 8 & 16 |
Continuity |
| LOW BEAM |
16 & 17 |
Continuity |
| HIGH BEAM |
7 & 16 |
Continuity |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002