Removal & Installation
Ensure ignition is off. Remove Engine Control Module (ECM). See ECM LOCATION table. To install, reverse removal procedure.
ECM LOCATION
| Model | (1) Location | ||
|---|---|---|---|
| Avalon | Behind Glove Box, Near Passenger's Side Kick Panel | ||
| Camry | Behind Glove Box | ||
| Camry Solara | Behind Glove Box | ||
| Highlander | Behind Glove Box | ||
| Land Cruiser | Above Glove Box, Near Passenger's Side Of Instrument Panel | ||
| Sequoia | Behind Glove Box & Heater Duct | ||
| Sienna | Passenger's Side Of Instrument Panel, Just Below Glove Box | ||
| Tacoma | Behind Glove Box | ||
| Tundra | Behind Glove Box & Heater Duct | ||
| 4Runner | Behind Glove Box | ||
|
|||