Typical Enabling Conditions
WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not preset | See PRE-CHECK |
| Battery voltage | 8 V or more |
| VVT system | No active test by scan tool |
| Engine RPM | 400 RPM to 6,200 RPM |
| ECT | -10 °C (14 °F) or more |
| Either of (a) or (b) is met | (a) IAT is -10°C (14°F) or more |
| Either of (a) or (b) is met | (b) ECT is 75°C (167°F) or more |
| MAF | Varies with ECT and RPM |
| TP | Not changing rapidly (when engine RPM is more than 3,000 RPM) |