Front Seat: Reassembly

Install the airbag sensor with a new bolt.

Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf) 

Install the adjuster inside shield with the screw.

Install the adjuster inside shield with the screw.

1. Install the cushion cover to the cushion pad with new hog rings.
2. Install the cushion cover with pad to the adjuster assy with new hog rings.

   HINT:

   When installing the hog rings, take care to prevent wrinkles as little as possible.

3. W/Seat heater:

   Install the clip to the adjuster assy.

1. Install the seatback cover to the seatback pad with new hog rings.
2. Install the seatback cover with pad to the seatback frame.

   HINT:

   When installing hog rings, take care to prevent wrinkles as little as possible.

3. W/Side airbag:

   Install the bracket to the seatback frame.

4. Install the headrest supports.

1. W/Seat heater:

   Connect the connector.

2. Install the seatback assembly and tighten the 4 bolts temporarily, starting from the front side bolt on the outer side tighten them completely.

   Torque: 44 N.m (440 kgf.cm, 32 ft.lbf) 

3. Install the seatback assembly to the seat adjusters assy with new hog rings.

   HINT:

   When installing hog rings, take care to prevent wrinkles as little as possible.

Install the inner belt with the bolt.

Torque: 42 N.m (430 kgf.cm, 31 ft.lbf) 

Install the cushion inner shield with the 2 screws.

Fig 1: Installing Front Seat Cushion Inner Shield With Screws

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install the cushion outer shield and Install the cushion outer lower shield with the 3 screws.

Fig 2: Installing Front Seat Cushion Outer Shield With Screws

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002