LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> Avalon XL >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS >> Power Window Control System >> Front Passenger Side Power Window Switch Power Source Circuit >> Inspection Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Inspection Procedure

  1. CHECK WIRE HARNESS (MULTIPLEX NETWORK SWITCH - BATTERY AND BODY GROUND) 
    1. Disconnect the H6 connector.
    2. Measure the resistance and voltage according to the value(s) in MULTIPLEX NETWORK SWITCH - BATTERY AND BODY GROUND (RESISTANCE)  .

      Resistance 

      MULTIPLEX NETWORK SWITCH - BATTERY AND BODY GROUND (RESISTANCE)

      Tester Connection Condition Specified Condition
      H6-7(E) - Body ground Always Below 1 Ω

      Voltage 

      MULTIPLEX NETWORK SWITCH - BATTERY AND BODY GROUND (VOLTAGE)

      Tester Connection Condition Specified Condition
      H6-12(BW) - Body ground Always 10 to 14 V
      Fig 1: Checking Wire Harness (Multiplex Network Switch - Battery And Body Ground)
      G04379117Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    NG: REPAIR OR REPLACE HARNESS OR CONNECTOR 

    OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE  

scientia non olet · About LEMON Manuals