DTC 01-DD Master Reset; DTC 01-E1 Voice Processing Device ON Error: Description
DTC
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| 01-DD *1 |
The device that should be the master has been disconnected after engine start |
|
| 01-E1 *2 |
The AMP device records that the AMP output does not function even while the source device operates |
HINT:
*1: This code may be stored if the engine is started and the ignition switch is turned to START position again.
*2: Even if no fault is present, this trouble code may be stored depending on the battery condition or engine start voltage.
NOTE:
- Before starting troubleshooting, be sure to clear DTCs to erase codes stored due to the reasons described in the HINT above. Then, check for DTCs and troubleshoot according to the output DTCs.
- The radio receiver is the master unit.
- Be sure to clear and recheck DTCs after the inspection is completed to confirm that no DTCs are output.