October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Inspection Procedure

INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (REAR RH)

Remove the switch.

Measure the resistance of the switch when the switch is operated.

Resistance

RESISTANCE SPECIFICATION

Switch Condition	Tester Connection	Specified Condition
UP	1 (D) - 2 (SD) 3 (U) - 4 (B)	Below 1 Ω
OFF	1 (D) - 2 (SD) 3 (U) - 5 (SU)	Below 1 Ω
AUTO DOWN	1 (D) - 4 (B) 3 (U) - 5 (SU)	Below 1 Ω

Fig 1: Identifying I2 Power Window Regulator Switch Connector

G05006561

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG: REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY (REAR RH)

OK: PROCEED TO NEXT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE