October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection And Installation: ECM: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
- REMOVE FRONT DOOR SCUFF PLATE RH
(See
REMOVAL
)
- REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
(See
REMOVAL
)
- REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2
(See
REMOVAL
)
- REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH
(See
REMOVAL
)
- REMOVE ECM
- Disconnect the 5 connectors from the ECM.
- Remove the 2 nuts, bolt and ECM.
- Remove the 2 screws to separate the ECM bracket from the ECM.
- Remove the 2 screws to separate the ECM bracket No. 2 from the ECM.
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.