Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | None |
Automatic Transmission:
AUTOMATIC TRANSMISSION SPECIFICATIONS
| Time after following conditions met: | 4 seconds or more |
| Ignition switch | ON |
| Park/neutral position switch | OFF |
| Vehicle speed | 5.59 mph (9 km/h) or more |
| Time after ignition switch OFF to ON | More than 0.5 seconds |
| Transfer neutral switch (only for 4WD) | Not N position |
Manual Transmission:
MANUAL TRANSMISSION SPECIFICATIONS
| Engine coolant temperature | 70°C (158°F) or more |
| Engine speed | 1,500 to 4,000 rpm |
| Fuel cut at high engine speed | Not executing |
| Engine load | 31.6% or more |