LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Matrix Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Road Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Road Test

  1. PROBLEM SYMPTOM CONFIRMATION 
    1. Inspect the SET function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to - (COAST)/SET.
      4. After releasing the switch, check that the vehicle cruises at the set speed.
        Fig 1: Checking SET/Coast Function
        G04830972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect the + (ACCEL) function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to - (COAST)/SET.
      4. Check that vehicle speed increases while the cruise control main switch is pushed to + (ACCEL)/RES (RESUME), and that the vehicle cruises at the newly set speed when the switch is released.
      5. Momentarily push the cruise control main switch to + (ACCEL)/RES (RESUME) and then immediately release it. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (Tap-up function).
        Fig 2: Checking ACCELERATION/RESUME Function
        G04830973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Inspect the - (COAST) function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to -(COAST)/SET.
      4. Check that vehicle speed decreases while the cruise control main switch is pushed to -(COAST)/SET, and that the vehicle cruises at the newly set speed when the switch is released.
      5. Momentarily push the cruise control main switch to - (COAST)/SET, and then immediately release it. Check that vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (Tap-down function).
        Fig 3: Checking SET/Coast Function
        G04830972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Inspect the CANCEL function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to - (COAST)/SET.
      4. When doing one of the following, check that the cruise control system is cancelled and that the normal driving mode is reset.
        • Depressing the brake pedal
        • Depressing the clutch pedal (Manual Transaxle)
        • Moving the shift lever to any position except D (Automatic Transaxle)
        • Pushing the ON-OFF button off
        • Pulling the cruise control main switch to CANCEL

        Reference: 

        Cruise control will be halted if VSC starts operation while driving. 

        Fig 4: Checking CANCEL Function
        G04830975Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Inspect the RES (RESUME) function.
      1. Push the ON-OFF button on.
      2. Drive at the required speed (40 km/h (25 mph) or higher).
      3. Push the cruise control main switch to -(COAST)/SET.
      4. When doing one of the following, check that the cruise control system is cancelled and that the normal driving mode is reset.
        • Depressing the brake pedal
        • Depressing the clutch pedal (Manual Transaxle)
        • Moving the shift lever to any position except D (Automatic Transaxle)
        • Pulling the cruise control main switch to CANCEL
      5. After pushing the cruise control main switch to + (ACCEL)/RES (RESUME) at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed prior to the cancellation.
        Fig 5: Checking ACCELERATION/RESUME Function
        G04830973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals