LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Matrix Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Stop Light Switch >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stop Light Switch: Inspection

  1. INSPECT STOP LIGHT SWITCH ASSEMBLY (WITHOUT CRUISE CONTROL) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Switch operation Specified resistance
      Switch pin free 10 kΩ or higher
      Switch pin pushed in Below 1 Ω
  2. INSPECT STOP LIGHT SWITCH ASSEMBLY (WITH CRUISE CONTROL) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester connection Switch operation Specified resistance
      1 - 2 Switch pin free 10 kΩ or higher
      3 - 4 Switch pin free Below 1 Ω
      1 - 2 Switch pin pushed in Below 1 Ω
      3 - 4 Switch pin pushed in 10 kΩ or higher
      Fig 1: Inspecting Stop Light Switch Assembly (With Cruise Control)
      G05195984Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals