LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Matrix Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System (1ZZ-FE) >> Ignition Switch >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch: Inspection

  1. INSPECT IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Measure the ignition starter switch resistance.

      Resistance 

      IGNITION OR STARTER SWITCH ASSEMBLY

      Switch Position Tester Connection Specified Condition
      LOCK - 10 kΩ or higher
      ACC 1-3 Below 1 Ω
      ON 1-2-3 5-6 Below 1 Ω
      START 1-2 4-5-6 Below 1 Ω

      If the result is not as specified, replace the ignition starter switch.

      Fig 1: Identifying Ignition Or Starter Switch Terminals With Positions
      G05233722Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals