Steering Angle Sensor: Installation

INSTALL STEERING ANGLE SENSOR
1. Install the steering angle sensor to the spiral cable.
  NOTE:
  - Engage the claws securely.
  - Do not damage the claws.
INSPECT SPIRAL CABLE (See INSPECTION )
PLACE FRONT WHEELS FACING STRAIGHT AHEAD

Fig 1: Identifying Steering Angle Sensor From Spiral Cable Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SPIRAL CABLE (See INSTALLATION )
CENTER SPIRAL CABLE (See INSTALLATION )
INSTALL STEERING WHEEL ASSEMBLY (See INSTALLATION )
INSTALL STEERING PAD (See INSTALLATION )
INSPECT STEERING PAD (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
INSPECT SRS WARNING LIGHT (See INSTALLATION )