Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
Engine coolant temperature sensor cold start monitor:
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs are not present | P0100 to P0103: Mass airflow meter |
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| Engine coolant temperature at engine start | Less than 60°C (140°F) |
| Intake air temperature sensor circuit | OK |
| Soak time | 0 seconds or more |
| Accumulated mass air flow | 1397 g or more |
| Engine | Running |
| Fuel cut | OFF |
| Difference between engine coolant temperature at engine start and intake air temperature | Less than 40°C (72°F) |
Engine coolant temperature sensor soak monitor:
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | P0100 to P0103: MAF meter P0110 to P0113: Intake air temperature sensor |
| Battery voltage | 10.5 V or more |
| Engine | Running |
| Soak time | 5 hours or more |
| Either of the following conditions (a) or (b) is met | - |
| (a) Engine coolant temperature | 60°C (140°F) or more |
| (b) Accumulated MAF | 2921 g or more |