Coast Control

If the cruise control switch is held to the - SET side while driving in cruise control mode, the device recognizes the cruise control requirement is at zero and gradually decelerates the vehicle speed. When the switch is released, the cruise control stores the current vehicle speed. From then on, the vehicle is controlled to stay at that speed.

Every time the switch is pressed to the - SET side momentarily (For about 0.5 seconds), the set speed is decreased by about 1.6 km/h. However, if the switch is pressed multiple times and attempts to put the set speed more than 5kmh below the actual vehicle speed, the device recalls the original set speed and controls the vehicle at that speed constantly.