LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis (Single Page) >> Electrical >> Starter >> Starting System >> Ignition Switch >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ignition Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE IGNITION SWITCH ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the 2 screws, then remove the ignition switch.
      Fig 1: Identifying Ignition Switch Screws
      G05109970Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals