September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Skid Control Buzzer: Installation
- INSTALL SKID CONTROL BUZZER ASSEMBLY
- Connect the buzzer connector.
NOTE:
Securely connect the connector.
- Attach the clamp to install the buzzer.
NOTE:
- Securely insert the clamp into the bracket.
- If the buzzer is dropped, replace it.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSTALL NO. 1 SWITCH HOLE BASE
(See
INSTALLATION
)
- INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
(See
INSTALLATION
)
- INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(See
INSTALLATION
)
- INSTALL COWL SIDE TRIM BOARD LH
(See
INSTALLATION
)
- INSTALL FRONT DOOR SCUFF PLATE LH
(See
INSTALLATION
)
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL