Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs (See DTC CHECK/CLEAR ).

1. CHECK NAVIGATION RECEIVER ASSEMBLY 
   1. Check if a disc can be inserted or ejected normally.

      OK: A disc can be inserted or ejected normally. 

      NG: REPLACE NAVIGATION RECEIVER ASSEMBLY  (See REMOVAL )

      OK: Go to Next Step 

2. DTC CLEAR AND RECHECK 
   1. Clear the DTCs (See DTC CHECK/CLEAR ).
3. Recheck for DTCs and check if the same trouble occurs again.

   OK: The same problem does not occur. 

   NG: REPLACE NAVIGATION RECEIVER ASSEMBLY  (See REMOVAL )

   OK: END