LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> General Information >> Identification >> Introduction >> Repair Instruction >> Customize Parameters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

NOTE:
  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.
  1. AIR CONDITIONING SYSTEM 

    Air conditioning system 

    AIR CONDITIONING SYSTEM REFERENCE CHART

    Display Default Contents Setting
    Set Temperature Shift Normal To control with shifted temperature against display temperature +2 C/+1 C/Normal/-1 C/-2 C
    Evaporator Control Automatic Function to set evaporator control to AUTOMATIC position (AUTO) to save power, or to coldest position (MANUAL) to dehumidify air and to prevent windows from fogging up Manual/Automatic
    Compressor/Air Inlet DEF Operation Link Function to turn A/C ON automatically linked with FRONT DEF button when A/C is OFF Normal/Link
    Compressor Mode Automatic Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF Automatic/Manual
    Air Inlet Mode Automatic In case of turning A/C ON when you desire to make compartment cool down quickly, this is function to change mode automatically to RECIRCULATION mode Manual/Automatic
    Foot/DEF Auto Mode ON Function to turn the air flow from Foot/DEF ON automatically when AUTO MODE is ON ON/OFF
    Foot/DEF Automatic Blow up Function ON Function to change blower level automatically when defroster is ON ON/OFF
    Air Purifier Auto Cancel ON - ON/OFF
  2. LIGHTING SYSTEM 

    Illuminated Entry 

    LIGHTING SYSTEM REFERENCE CHART

    Display (Item) Default Contents Setting
    Lighting Time 15s Changes illumination duration after door closure.
    (It will quickly fade out in case of turning ignition switch ON.)    		 7.5s/15s/30s
    I/L when ACC OFF ON Illuminates light when ignition switch is turned from ACC to OFF.
    (Room light illuminated when interior light switch in DOOR position)    		 ON/OFF
    I/L ON W/Door Key Unlock ON Function to light up room light when unlocking with door key cylinder.
    (Room light illuminated when interior light switch in DOOR position)    		 ON/OFF
    Illumination System ON Function to light up foot light when one of the following occurs: Ignition switch is turned ON, door unlocked or door open. ON/OFF
    Light Control ON Function to light up foot light when ignition switch is ON and shift position is not P. ON/OFF

    Light control (USA) 

    LIGHT CONTROL REFERENCE CHART

    Display (Item) Default Contents Setting
    DRL Function ON Daytime running light function ON or OFF. ON/OFF

    HINT:

    Sensitivity adjustments are difficult to confirm. Check by driving the customer's vehicle.

  3. POWER DOOR LOCK CONTROL SYSTEM 

    Power door lock control system: 

    POWER DOOR LOCK CONTROL SYSTEM REFERENCE CHART

    Tester Display Default Function Setting
    Unlock Key Twice ON Unlocks only driver side door when driver side door key cylinder turned to unlock once, and unlocks all doors when turned to unlock twice. For OFF setting, turning it once unlocks all doors. ON/OFF
  4. WIRELESS DOOR LOCK CONTROL SYSTEM 

    Wireless Door Lock Control System: 

    WIRELESS DOOR LOCK CONTROL SYSTEM REFERENCE CHART

    Display (Item) Default Contents Setting
    Hazard Answer Back ON When LOCK switch on transmitter pressed, all hazard warning lights illuminate once. When UNLOCK switch pressed, all hazard warning lights illuminate twice ON/OFF
    Wireless Buzzer Resp ON Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch pressed ON/OFF
    Open Door Warning ON If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds ON/OFF
    Wireless Control ON ON/OFF of wireless door lock function ON/OFF
    Panic Alarm Function ON Operates security alarm when PANIC switch on transmitter continuously pressed for 1 second ON/OFF
    Unlock 2 Operation ON Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON/OFF
    Auto Lock Time 60s Function to change the time until relocking after unlocking with the wireless door lock function. 30s/60s/120s
    Wireless Auto Lock ON Function to control the automatic relocking of doors after unlocking with the wireless door lock function. ON/OFF
  5. SMART KEY SYSTEM 

    Smart Key/Access 

    SMART KEY SYSTEM REFERENCE CHART

    Display Default Contents Setting
    Park Wait Time*1 2.5s Function that sets the waiting time to permit unlocking the door after the door is locked with the entry lock function. 0.5s/1.5s/2.5s/5s
    Ignition Available Area*2 ALL Function to choose the available area for the key to start the engine and cancel the steering lock. FRONT/ALL*3
    HINT:
    *1: Waiting time to permit unlocking door after locking.
    *2: Entry ignition available area.
    *3: "FRONT" means front, and "ALL" means front and rear.

    Warning 

    WARNING REFERENCE CHART

    Display Default Contents Setting
    Key Low Battery Warning*4 ON Function that warns the driver that the key battery power is low. ON/OFF
    HINT:
    *4: Warn when key battery becomes weak.
  6. METER/GAUGE SYSTEM 

    Combination Meter 

    COMBINATION METER REFERENCE CHART

    Tester Display Default Function Setting
    Seat-belt Warning Buzzer D/P ON Seat belt warning buzzer ON/OFF setting D/P ON: Driver and passenger buzzer ON
    D ON: Driver buzzer ON
    P ON: Passenger buzzer ON
    DIP OFF: Driver and passenger buzzer OFF
scientia non olet · About LEMON Manuals