LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Tundra Base, 5.7 W >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Brake Control/Dynamic Control System) >> Yaw Rate And Deceleration Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Yaw Rate And Deceleration Sensor: Removal

WARNING: This page is about a different car, the 2009 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE REAR CONSOLE BOX POCKET  (See REMOVAL )
  5. REMOVE CONSOLE BOX CARPET  (See REMOVAL )
  6. REMOVE REAR CONSOLE BOX ASSEMBLY  (See REMOVAL )
  7. REMOVE YAW RATE SENSOR 
    1. Remove the 2 nuts (labeled A) and sensor.
    2. Disconnect the sensor connector (labeled B), and then detach the clamp (labeled C) from the sensor bracket.
      Fig 1: Identifying Sensor Connector, Clamp And Sensor Bracket
      G05159869Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals