LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Sienna LE, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Accelerator Pedal Rod >> Removal >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Accelerator Pedal Rod: Removal: Removal

  1. REMOVE ACCELERATOR PEDAL ROD 
    1. Disconnect the accelerator pedal position sensor connector.
      Fig 1: Locating Accelerator Pedal Position Sensor Connector And Nuts
      GTY133737Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and accelerator pedal rod.
scientia non olet · About LEMON Manuals