Service Data
| Camshaft timing oil control valve assembly | Standard resistance | 6.9 to 7.9 Ω at 20 °C (68 °F) |
| Throttle with motor body assembly | Standard resistance 1 (M-) - 2 (M+) |
0.3 to 100 Ω at 20 °C (68 °F) |
| Accelerator pedal position No. 1 standard voltage | Standard resistance Accelerator pedal released Accelerator pedal depressed |
0.5 to 1.1 V 2.6 to 4.5 V |
| Accelerator pedal position No. 2 standard voltage | Standard resistance Accelerator pedal released Accelerator pedal depressed |
1.2 to 2.0 V 3.4 to 5.0 V |
| Camshaft position sensor | Standard resistance | 1,630 to 2,740 Ω at cold 2,065 to 3,225 Ω at hot |
| Crankshaft position sensor | Standard resistance | 985 to 1,600 Ω at cold 1,265 to 1,890 Ω at hot |
| Engine coolant temperature sensor | Standard resistance | 2.32 to 2.59 kΩ Approximately 20 °C (68 °F) 0.310 to 0.326 kΩ Approximately 80 °C (176 °F) |
| Knock sensor | Standard resistance | 120 to 280 kΩ at 20 °C (68 °F) |
| EFI fuse | Standard resistance 1 - 2 |
Below 1 Ω |
| AM2 fuse | Standard resistance 1 - 2 |
Below 1 Ω |
| Integration relay EFI relay |
C1 - A1 | Below 1 Ω |
| C1 - A4 | 10 kΩ or higher (Battery voltage not applied) |
|
| C1 - A4 | Below 1 Ω (Battery voltage applied to terminals A2 and A3) |
|
| Integration relay FAN NO. 1 relay |
B5 - B8 | 10 kΩ or higher (Battery voltage not applied) |
| B5 - B8 | Below 1 Ω (Battery voltage applied to terminals B6 and B7) |
|
| Integration relay IG2 relay |
C1 - B1 | Below 1 Ω |
| C1 - B4 | 10 kΩ or higher (Battery voltage not applied) |
|
| C1 - B4 | Below 1 Ω (Battery voltage applied to terminals A2 and A3) |