Window Defogger Wire: Repair: Repair

REPAIR WINDOW DEFOGGER WIRE

Fig 1: Placing Masking Tape Along Both Sides Of Broken Defogger Wire

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Place masking tape along both sides of the wire.

TEXT IN ILLUSTRATION

Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).

Fig 2: Applying Small Amount Of Agent To Wire
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Using a fine tip brush, apply a small amount of the agent to the wire.
After a few minutes, remove the masking tape.
NOTE:
Do not use the window defogger system for at least 24 hours after performing the repair.