Installation (To 12/2010): Installation

INSTALL TCM
1. Install the TCM to the automatic transaxle assembly.
2. Install and tighten the 2 bolts in the order shown in the illustration.
  
  Fig 1: Locating Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
3. Connect the connector to the TCM.
  
  Fig 2: Identifying Connector To TCM
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Turn the lock lever and secure the connector with the lock lever.
INSTALL INTAKE AIR RESONATOR SUB-ASSEMBLY . Refer to INSTALLATION - Step 68
INSTALL NO. 1 AIR CLEANER INLET . Refer to INSTALLATION - Step 69
INSTALL NO. 2 AIR CLEANER INLET . Refer to INSTALLATION - Step 72
INSTALL BATTERY
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
INSTALL COOL AIR INTAKE DUCT SEAL . Refer to INSTALLATION - Step 101
PERFORM TCM REGISTRATION
HINT:

Refer to REGISTRATION .