Air Fuel Ratio Sensor: Removal: Removal

REMOVE WINDSHIELD WIPER MOTOR AND LINK
1. Remove the windshield wiper motor and link. Refer to REMOVAL .
REMOVE COWL BODY MOUNTING REINFORCEMENT LH . Refer to REMOVAL - Step 7
REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY . Refer to REMOVAL - Step 8
REMOVE NO. 2 CYLINDER HEAD COVER . Refer to REMOVAL - Step 29
REMOVE AIR FUEL RATIO SENSOR NO. 2
1. Disconnect the air fuel ratio sensor connector and clamp.
  
  Fig 1: Identifying Air Fuel Ratio Sensor, Connector & Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, remove the air fuel ratio sensor.
  
  Fig 2: Identifying SST & Air Fuel Ratio Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  - SST: 09224-00010