DTC B27A6: Open in Rear Floor Electrical Key Oscillator Circuit: Description
WARNING: This page is about a different variant/trim than selected.
The certification ECU (smart key ECU assembly) generates a request signal and sends it to the No. 2 indoor electrical key antenna assembly (for center floor). To detect the key inside the cabin, the No. 2 indoor electrical key antenna assembly (for center floor) creates a detection area in the cabin.
DTC B27A6 is detected by the certification ECU (smart key ECU assembly) when an open circuit occurs between the certification ECU (smart key ECU assembly) and No. 2 indoor electrical key antenna assembly (for center floor) terminals (between CLG6 and ANTE6, or CG6B and CLGB).
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B27A6 | Open circuit detected between the certification ECU (smart key ECU assembly) and No. 2 indoor electrical key antenna assembly (for center floor) terminals (between CLG6 and ANTE6, or CG6B and CLGB). |
|