Entry Interior Alarm does not Sound: Procedure

WARNING: This page is about a different variant/trim than selected.

CHECK COMBINATION METER ASSEMBLY (OPERATION)
1. When the power switch is on (IG) and the shift lever is in R, check that the combination meter buzzer sounds.
  OK
  
  Combination meter buzzer sounds.
NG → See step 2

OK → See step 3
GO TO METER / GAUGE SYSTEM (Proceed to Problem Symptoms Table). Refer to HOW TO PROCEED WITH TROUBLESHOOTING
REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY). Refer to REMOVAL