Typical Enabling Conditions
| Monitor runs whenever following DTCs are not stored | P0010 (Camshaft timing oil control valve assembly) P0011 (VVT system - advance) P0012 (VVT system - retard) P0016 (VVT system - misalignment) P0102, P0103 (Mass air flow meter) P0107, P0108 (Manifold absolute pressure) P0115, P0117, P0118 (Engine coolant temperature sensor) P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135 (Throttle position sensor) P0125 (Insufficient coolant temperature for closed loop fuel control) P014C, P014D, P015A, P015B, P2195, P2196, P2237, P2238, P2239, P2252, P2253 (Air fuel ratio sensor) P0171, P0172 (Fuel system) P0300, P0301, P0302, P0303, P0304 (Misfire) P0335 (Crankshaft position sensor) P0340, P0342, P0343 (Camshaft position sensor) P0351, P0352, P0353, P0354 (Igniter) P0401 (EGR system (closed)) P219A, P219C, P219D, P219E, P219F (Air fuel ratio imbalance) |
| Auxiliary battery voltage | 8 V or higher |
| Time after engine start | 3 seconds or more |
| Starter | OFF |
| Engine coolant temperature at engine start | -10°C (14°F) or higher |
| Engine coolant temperature | -10°C (14°F) or higher, and less than 50°C (122°F) |
| Engine idling time | 0 seconds or more |
| Fuel-cut | OFF |
| Vehicle speed | Less than 60 km/h (37.5 mph) |
| Atmospheric pressure | 76 kPa(abs) [570 mmHg(abs)] or higher |