| Restraints Occupant Classification System Module Communication Stop Mode |
Any of the following conditions are met:
- Communication stop for "Occupant Detection" is indicated on the "Communication Bus Check" screen of the Techstream.
Refer to PROBLEM SYMPTOMS TABLE [11/2015 - 11/2017]
, or refer to PROBLEM SYMPTOMS TABLE [11/2017 - 12/2018]
, or refer to PROBLEM SYMPTOMS TABLE [12/2018 - 08/2019]
, or refer to PROBLEM SYMPTOMS TABLE [08/2019 - 07/2020]
, or refer to PROBLEM SYMPTOMS TABLE [07/2020 - ]
- Communication stop history for "Occupant Detection" is indicated on the "Communication Bus Check (Detail)" screen of the Techstream. (The Lost Communication Time value for "Occupant Detection" is 6 or more.)
Refer to PROBLEM SYMPTOMS TABLE [11/2015 - 11/2017]
, or refer to PROBLEM SYMPTOMS TABLE [11/2017 - 12/2018]
, or refer to PROBLEM SYMPTOMS TABLE [12/2018 - 08/2019]
, or refer to PROBLEM SYMPTOMS TABLE [08/2019 - 07/2020]
, or refer to PROBLEM SYMPTOMS TABLE [07/2020 - ]
- Communication system DTCs (DTCs that start with U) that correspond to "Restraints Occupant Classification System Module Communication Stop Mode" in "DTC Combination Table" are output.
Refer to DTC COMBINATION TABLE [11/2015 - 11/2017]
, or refer to DTC COMBINATION TABLE [11/2017 - 12/2018]
, or refer to DTC COMBINATION TABLE [12/2018 - 08/2019]
, or refer to DTC COMBINATION TABLE [08/2019 - 07/2020]
, or refer to DTC COMBINATION TABLE [07/2020 - ]
|
- Occupant detection ECU branch line or connector
- Power source circuit of occupant detection ECU
- Occupant detection ECU ground circuit
- Occupant detection ECU
|